RUST-OLEUM WOOD STAIN ONE COAT
DESCRIPTION AND USES
Rust-Oleum®Wood Stain is a premium, high performance stain enhanced with nano pigments and soya oil for exceptional color clarity. Combined, the innovative formula creates rich, one coat coverage and one hour dry time. No wood conditioner is required. This advanced formula provides beautiful results 3X faster than traditional wood stains. Top coat your project with Rust-Oleum Varnish for long-term protection and durability. Rust-Oleum Wood Stain can be used on all interior wood projects including furniture, cabinets, doors and trim, floors and paneling.
- 946ml cans
- Achieve colour in one coat
- Dries in one hour
- 75% more coverage
Surfaces must be clean, dry and sound. Remove any existing finishes with sandpaper or stripper. Prepare bare wood for staining by sanding in the direction of the grain. Begin with #120 grit sandpaper and progress through #150 and #180 grits. Before staining, remove all sanding dust with a vacuum or tack rag and dirt, grease, oil or glue with a clean rag dampened with mineral turps.
Be sure to test your stain to verify the desired color. To test, follow Stain Application instructions and apply the stain in an inconspicuous area.
Shake container and stir before use. Stir the material thoroughly and often during use. For best results, use when temperatures are between 16-32°C. Allow longer dry times for damp, humid days. Apply one coat of stain liberally with a brush or a clean lint-free rag. Allow the stain to penetrate for 3-5 minutes; then remove excess stain by wiping with a rag in the direction of the grain. Only one coat of stain is required. Removal of all excess material is essential to ensure proper dry time and proper adhesion of the topcoat.
Dry times are based on 21°C and 50% relative humidity. Allow longer dry times for damp, humid days. Darker colours may require a slightly longer dry time.
PROTECTING THE WOOD
To complete your wood project and provide long term protection, finish with any varnish depending on your project needs. A varnish can be applied 1 hour after stain application.
Each container will cover approximately 25m2per 946 mL.
Clean application tools and equipment with mineral turps.