Description
GSA Bond & Seal is a high quality professional universal sealant and adhesive based on hybrid technology, which cures under the influence of humidity
to form a durable elastic rubber.
Features and benefits
• Universal bonding and sealing for interior and exterior use
• Permanently elastic
• Free of isocyanates, solvents and silicones
• No shrinkage and bubble free
• Resistant to UV, moisture, mould and weather
• Adheres perfectly without primer on most surfaces even
damp surfaces.
• Neutral curing, almost odourless
• Non corrosive towards metals
• High mechanical resistance, end strength and E-modules
• Absorbs acoustic and mechanical vibrations
Applications:GSA Bond & Seal was specifically
developed as a universal sealant for durable elastic sealing
of connection joints and joints in pedestrian walk ways in
building and industry. Universal construction adhesive for
bonding many building materials such as: stone, concrete,
glass, plasterboard, PU, PVC, hard plastics, enamel,
ceramic, copper, lead, zinc, aluminium, metals, alloys,
stainless steel, HPL and cement fibre panels, wood and
paint systems.
Directions of use: Apply adhesive in vertical stripes with
10-20cm between stripes. Do not apply adhesive in dots!
The use of 3mm double sided tape is recommended to
support the adhesion during the first 24 hours and to
make sure the thickness is correct.
Limitations
• Not suitable for PE, PP, PC, PMMA, PTFE, soft
plastics, neoprene and bituminous substrates
• Not suitable for natural stone and mirrors
• Not suitable in combination with chlorides (pools)
Surface preparation and finishing: Application
temperature +5°C to +25°C (applies to environment and
substrates). All substrates must be sound, clean and free
of grease and dust. Bond & Seal adheres perfectly without
the use of primer on non-porous substrates. Always test
adhesion prior to application. Use Finisher to smooth the
joint.
Paintability: Bond & Seal is paintable with most waterbased and synthetic paints. We recommend resting
compatibility with paint prior to application. If Bond & Seal
is being painted over (not necessary), we recommend
slightly sanding the sealant and the junction surfaces prior
to use with a fine grade sane paper. For the best results,
we recommend painting a few days after application.
