(4 Pack) - Dy-mark MetalPro Quick Dry - Gloss Grey - 1 Litre

Includes 4 x 1 Litre Tins

Dy-Mark MetalPro Quick Dry Enamel is a quick drying top coat which protects
surfaces against rust whilst providing a durable finish. Ideal for both interior and exterior
projects. Suitable for use on all metal surfaces such as fences, gates, doors,
letterboxes, fabricated steel, brackets, trailers, factory equipment and machinery.
Available in gloss, satin, matt and metallic finishes.

Top Coat

• Touch dry in 20 minutes
• Anti-corrosive Coating
• Ideal for interior & exterior projects

Suitable Surfaces:

• Pre-painted metal surfaces, steel, wrought iron, galvanised iron and non-ferrous metals such as; aluminium, alloys, ZINCALUME® and stainless steel with appropriate primer.

Application:
The product can be applied with brush, roller or spray (airless or conventional). Stir the can thoroughly until the product is uniform with a flat stirrer. Continue mixing frequently during use.

Brush/Roller:
Apply even coats of the mixed material to the prepared surface. Thin if necessary for ease of application (maximum of 5% Xylene Thinner or Mineral Turps). When brushing/rolling additional coats may be required to achieve desired thickness.

Conventional Spraying:
Agitate paint pot regularly to avoid settling of the product. If necessary, thin the product with a maximum of 15-25% Xylene Thinner or Enamel Thinner and apply at the pressure of 40-60psi. Apply 1 light coat first. Then apply 1-2 full coats with 5-10 minutes flash off between coats depending on temperature.

Coverage:
Approximately 10-12m2 per litre at 25 micron recommended dry film thickness.