APCO Touchwood Acrylic Fence Paint – Monument | 10L

APCO Touchwood Acrylic Fence Paint – Monument | 10L

APCO Touchwood Acrylic Fence Finish is a water-based acrylic paint designed for timber fencing. Australian made and Australian owned, it can be applied by brush, roller or spray, with water cleanup.

Product details

• Colour: Monument

• Sizes: 10L

• Finish: Flat, with a listed gloss level of 0–3%

• Coverage: Approximately 10m² per litre per coat, depending on the surface and application method

• Touch dry: Approximately 30 minutes at 25°C and 60% relative humidity

• Recoat: 2–4 hours under the same conditions

Suitable surfaces

For treated timber fencing, including rough-sawn timber without primer. Also suitable for properly cleaned and primed galvanised iron.

Preparation and application

Ensure surfaces are clean, dry and free from loose material. Stir thoroughly before use. Up to three coats may be required depending on colour and timber porosity. Cooler conditions, higher humidity and thicker coats will extend drying times.

Some fading from sunlight is expected, and periodic maintenance coats may be required. Follow the product label and technical data sheet before application.