PLEASE NOTE EXPIRY DATE SEP 25

Box of 24

IMPORTANT – PLEASE READ

• This product is past the manufacturer’s use-by date and is sold as-is at a clearance price. Performance and shelf life cannot be guaranteed.
• Manufacturer warranty or guarantee does not apply to this clearance item.
• Not suitable for critical, structural, waterproofing or compliance-related applications.
• No change-of-mind returns once dispatched, unless required under Australian Consumer Law. Buyer assumes responsibility for storage, handling, use and results.

MANUFACTURER PRODUCT INFORMATION (FOR REFERENCE ONLY)

GSA Glue Screws – 345g Cartridge (Box of 24)
High-performance, one-component construction adhesive sealant originally designed for bonding a wide range of building materials. Formulated for strong initial grab, good adhesion, and reduced slump on vertical surfaces for trade and DIY applications.

Typical Applications (when within shelf life)

• Skirting boards (wood & PVC)

• Particleboard & fibre cement sheeting

• Masonry, brick & concrete

• Galvanised iron & steel

• Flooring panels

• Safe for foamed polystyrene & mirror-backed tiles

Specifications (when within shelf life)

• Appearance: Thick paste, brown

• Solids content: 77%

• Specific gravity: ~1.16 g/mL

• Open time: Up to 40 min @ 23°C, 50% RH

• Curing time: 24–72 hours (temperature & substrate dependent)

• Lap shear strength: 4.43 N/mm² (wood-to-wood)

• Application temperature: -20°C to 38°C

• Service temperature: -30°C to 60°C

• Coverage: 400–1000 g/m² (approx. 15m of 6mm bead per 345g cartridge)

• Packaging: 345g cartridge | Carton: 24 | Pallet: 144 cartons

Features & Benefits (when within shelf life)

• Strong initial grab – reduces need for clamping

• Bonds a wide variety of construction materials

• Will not slump on vertical applications

• Safe for polystyrene & mirror-backed tiles

General Application Guide (when within shelf life)

Surfaces should be clean, dry and free from oil, grease and dust. Apply using a standard cartridge gun. Clamp, nail or screw components until fully cured. Remove uncured adhesive with a cloth; cured adhesive by sanding or scraping.

Limitations (manufacturer guidance)

• Not suitable for epoxy, silicone, certain plastics, painted or varnished surfaces, some sheet goods, wood flooring or ceilings

• Not recommended for use below 5°C or above 50°C

• Not suitable for areas subject to severe or permanent water immersion

IMPORTANT NOTE:
The above information is provided for general reference only, based on the manufacturer’s original specifications. As this product is past its use-by / shelf life date, performance, curing behaviour and suitability cannot be guaranteed. Refer to the Important Notice above before purchasing.

IMPORTANT – PLEASE READ BEFORE PURCHASING

This product is past the manufacturer’s use-by / shelf life date and is sold as-is at a heavily discounted clearance price. The product may still be usable; however performance, curing time, adhesion, colour consistency, and shelf stability cannot be guaranteed.

This item is not recommended for critical, structural, waterproofing, compliance-related, or warranty-sensitive applications.

Due to the nature of this clearance item, no returns, refunds, or exchanges will be accepted for change of mind, performance issues, or suitability, unless required under Australian Consumer Law.

Shelf life and performance may be further affected by transport and storage conditions once dispatched, which are beyond our control. Once dispatched, the buyer assumes responsibility for storage, handling, application, and results.

By purchasing, you acknowledge and accept the above conditions.